round die DIN EN 22568 (DIN 223) B HSS MF 24 x 2

Round die MF24x2 HSS DIN 223 
 
Technical Specifications: 
 
Direction: Right 
Tolerance: 6g 
Processed material: Steel 
Form: Form B 
 
 
Thread pitch: 2,0
Bolt diameter:  23,82
Diameter round die: 55
Round die height:  16
 
round die with spiral point 
 
Creation of external threads 
 
The core hole is drilled with a twist drill. You can find the required Twistdrill diameter in the table. Important: The core 
hole for blind holes must be drilled to the tap point deeper than the required thread. We recommend to lower the core hole to 
the thread diameter. Attach the tap into adjustable tap wrench or in the toolholder with ratchet for lower sizes. Pay attention 
that the screw thread of the arm of the adjustable tap wrench is fixed properly. Apply the tap vertically to the drilling. Rotate the 
mounted tap clockwise into the drilling. After each half-turn the chip must be broken by rotating back again. 
 
For cutting external threads according to the ISO Standards of metric coarse threads M1 to M68 and metric fine threads 
M1 to M56 preslotted (Form B) round dies are used.