round-die metric M form B DIN223 DIN EN 22568 HSSE 00406

round die DIN EN 22568 (DIN 223) B HSSE M 20

70,92€

incl. VAT, excl. shipping cost
available / subject to prior sale
Delivery time (DE): 2-3 working days

Art.-Nr.: B00406290
EAN: 4014176217304

Round die HSSE B DIN 223 M 20

Technical Specifications:

Direction: Right
Tolerance: 6g
Processed material: V2A-Steel
Form: Form B

Thread pitch: 2,5
Bolt diameter: 19,79
Diameter round die: 45
Round die height: 18

round die with spiral point

Creation of external threads

The core hole is drilled with a twist drill. You can find the required Twistdrill diameter in the table. Important: The core
hole for blind holes must be drilled to the tap point deeper than the required thread. We recommend to lower the core hole to
the thread diameter. Attach the tap into adjustable tap wrench or in the toolholder with ratchet for lower sizes. Pay attention
that the screw thread of the arm of the adjustable tap wrench is fixed properly. Apply the tap vertically to the drilling. Rotate the
mounted tap clockwise into the drilling. After each half-turn the chip must be broken by rotating back again.

For cutting external threads according to the ISO Standards of metric coarse threads M1 to M68 and metric fine threads
M1 to M56 preslotted (Form B) round dies are used.

HSSE-G = grounded high-speed steel with 5% Cobalt. Suitable for unalloyed and low alloyed steels up to 800 N / mm² strength, malleable and non-ferrous metals. And for low alloyed stainless steel. Not for V2A and V4A Steel.

(

based on 0

Reviews)

Our product range

e-tapping

round die DIN EN 22568 (DIN 223) B HSSE M 20

OTHER CUSTOMERS WERE INTERESTED IN