Tap holder M3-M8 with hexagonal shank

22,04€

incl. VAT, excl. shipping cost
in stock
Delivery time (DE): 2-3 business days

Art.-Nr.: B00612040
EAN: 4014176226344

Our GSR Snap Drive 6K creates the right connection between square-shank tools and your cordless screwdriver. The adjustable adapter for cordless screwdrivers with a hex shank to DIN 3126 form E allows quick and secure holding of tools with a square of 2.5 to 5.5 mm: robust, precisely fitting and versatile. This suits hand taps to DIN 352 from M 3 to M 10 as well as screw extractors, tap extensions and reamers. The 1/4″ (6.35 mm) hex shank with groove fits bit holders and quick-change chucks with a 1/4″ hex socket. Like all GSR Snap adapters, it has a knurled locking nut for easy tightening. The one-piece body is made of alloyed tool steel; the jaws and the drive have a black-oxide finish.

Technical data:

Item number	B00612040
EAN	4014176226344
Description	GSR Snap Drive 6K Adapter M 3 – M 10
Size	No. 1
Suitable for hand taps DIN 352	M 3 – M 10
Square clamping range	2.5 – 5.5 mm
Drive	1/4″ (6.35 mm) hex shank with groove, DIN 3126 form E
Overall length	61 mm
Body	One-piece, alloyed tool steel
Finish	Black oxide
Locking nut	Knurled, hand-tightened
Manufacturer	GSR

Version	Drive	Threads	Square	Length	Item no.
Snap Drive 6K No. 1	1/4″ hex	M 3 – M 10	2.5 – 5.5 mm	61 mm	B00612040 (this item)
Snap Drive 6K No. 2	7/16″ hex	M 5 – M 12	4.5 – 8.0 mm	61 mm	B00612050
Snap Connect 4K No. 1	1/4″ square	M 3 – M 10	2.5 – 5.5 mm	48 mm	B00612090
Snap Connect 6K No. 1.1/2	3/8″ square / 19 mm hex	M 3 – M 12	2.5 – 7.0 mm	48 mm	B00612430

Choose the adapter by your drive:

Cordless screwdriver with 1/4″ hex socket (standard bit holder): Snap Drive 6K M 3 – M 10
Cordless screwdriver with 7/16″ hex socket: Snap Drive 6K M 5 – M 12
Reversible ratchet with 1/4″ square drive: Snap Connect 4K M 3 – M 10
Reversible ratchet with 3/8″ square drive or 19 mm open-end wrench: Snap Connect 6K M 3 – M 12

Then check the square on the tool shank: it must be within the clamping range of the adapter.

The adapter clamps all tools with a square of 2.5 to 5.5 mm:

The range M 3 to M 10 applies to hand taps to DIN 352. Machine taps, for example to DIN 371 or DIN 376, may have different square sizes. In that case, measure the square.

The Snap Drive 6K is designed for hand taps and short machine taps. For machine taps on a cordless screwdriver, use our QC adapter for internal threads; for external threads with round dies, use our SC adapter.

Cutting threads in through and blind holes with a cordless screwdriver, in the workshop and on site
Many identical threads in a short time and with less effort than by hand
Re-cutting damaged or painted threads
Removing broken screws with a screw extractor, with the cordless screwdriver set to reverse

Turns a cordless screwdriver into a tapping and screw extraction tool
One adapter for all squares of 2.5 to 5.5 mm (M 3 – M 10)
1/4″ hex shank with groove to DIN 3126 form E: locks into quick-change chucks and sits securely
Knurled locking nut for easy tightening
Robust: body made from a single piece of alloyed tool steel, black oxide
Engineered in Remscheid, Germany

GSR Snap adapter: jaws, locking nut and drive

Use hand taps and short machine taps only. For machine taps, use our QC adapter
Set the clutch of the cordless screwdriver to a low setting so that the tap does not overload and break
Work at low speed: forward to cut, reverse to back out
Drill the tap hole according to the tap drill size table and countersink it slightly
Start the tap straight to the hole, with no side pressure for the first turns
Use cutting oil, especially on steel and stainless steel
In blind holes and tough material, turn back briefly from time to time to break the chips
Tighten the locking nut firmly so that the tool does not slip

Matching accessories:

More information:

(

based on 0

Reviews)

Our product range

e-tapping

Tap holder M3-M8 with hexagonal shank

OTHER CUSTOMERS WERE INTERESTED IN